Water Heater Repair Portland Oregon Blog

Water Heater CO2 Poisoning Prevention

Posted by on May 21, 2015 in Gas Water Heater Repair Portland, Tankless Water Heater Repair Portland, Water Heater Installation Portland, Water Heater Repair Portland Oregon | 0 comments

Today Water Heater Repair Portland intends to focus on the dark side of water heaters. Although a relatively maintenance free home appliance, there are 2 substantial risks one really should exercise safety with to make sure that everybody inside the household is protected. The first threat is of a water heater explosion, and the next, which happens to be our subject the following, is carbon monoxide poisoning. Any nonrenewable fuel burning home appliance produces this fatal gas, including water heaters, but this hazard can be managed simply. We will examine first, the factors and sources of carbon monoxide poisoning, next the symptoms, and finally the best ways to safeguard ones residence.

Reasons for Carbon Monoxide Poisoning

By definition, carbon monoxide gas (CO) is a colorless, odor free gas that is a bi-product of the burning of a nonrenewable fuel source such as wood, gasoline, coal, natural gas, or kerosene. Inhaling carbon monoxide gas fumes not only avoids oxygen from being utilized correctly by the body, however likewise triggers damage to the central nervous system. Individuals with existing wellness issues such as heart and lung illness are particularly susceptible, as are babies, kids, pregnant women, and seniors.

Sources of Carbon Monoxide Gas

The cold months heating period is when the bulk of carbon monoxide gas direct exposures happen thanks to using unvented supplemental heaters. An unvented additional heater is a kind of space heater that utilizes interior air for heating and vents the gases generated in the heating procedure out into the home. Many heaters of this kind use kerosene or natural gas for fuel. While more recent designs have oxygen sensing units that turned off the heater when the oxygen level in the area falls below a specific level, older designs do not have such safety functions. Because of these security troubles, unvented space heaters have actually been prohibited in a number of states. Other types of carbon monoxide gas are from not working cooking equipment, cigarette smoke, obstructed chimneys, car exhaust, not working furnaces and gas clothing dryers, wood burning fireplaces, and, as we know, a water heater.

Signs of Carbon Monoxide Gas Poisoning

The signs of carbon monoxide poisoning are not at all times the exact same from one person to another and they are very similar to several other varieties of ailment, like the flu or food poisoning. The subsequent list are the most typical signs and symptoms, however a doctor really should be contacted if one is not sure that carbon monoxide gas is the origin of the symptom.Hot Water Heater Repair Portland

queasiness and throwing up
rapid heart beat
loss of consciousness or coma
respiratory failure
cardiac arrest
loss of hearing
blurred vision

Carbon Monoxide Poisoning Avoidance From a Water Heater

The initial precautionary measure is to make certain the water heater has been appropriately setup by an expert. Next, regular upkeep is needed as is a operating carbon monoxide gas detector in the residence.

Defense By Appropriate Gas Appliance Ventilation

The CDC provides the following info on avoiding CO2 poisoning by ensuring ones home appliances are vented properly.

  • All gas appliances must be vented so that CO will not build up in your home, cabin, or camper.
  • Never burn anything in a stove or fireplace that isn’t vented.
  • Have your chimney checked or cleaned every year. Chimneys can be blocked by debris. This can cause CO to build up inside your home or cabin.
  • Never patch a vent pipe with tape, gum, or something else. This kind of patch can make CO build up in your home, cabin, or camper.
  • Horizontal vent pipes to fuel appliances should not be perfectly level. Indoor vent pipes should go up slightly as they go toward outdoors. This helps prevent CO or other gases from leaking if the joints or pipes aren’t fitted tightly.  (read more…)

It is certainly essential to have CO2 detectors in the house. The Colorado State University Extension provides the following suggestions when choosing a CO2 alarm.

  • Some inexpensive alarms consist of a card with a spot (spot detectors) that changes color in the presence of CO. The absence of an audible signal does not meet UL or IAS requirements for alarms, so these devices do not provide adequate warning of CO.
  • Some CO alarms have a sensor that must be replaced every year or so. The expense of this part should be a factor in purchase decisions.
  • Battery-operated alarms are portable and will function during a power failure, which is when emergency heating might be used. Batteries must be replaced, although some alarms have long-life batteries that will last up to five years.
  • Line-powered alarms (110 volt) require electrical outlets but do not need batteries. They will not function during a power failure. Some line-powered alarms have battery backups.
  • Some alarms have digital readouts indicating CO levels. Alarms with memories can help document and correct CO problems.  (read more…)

The following video provides some good security ideas for water heaters.

Not to frighten anybody, however we likewise wished to include the following video of a water heater set up that is not working properly and is dangerous.

Please see a doctor right away if one thinks that carbon monoxide gas poisoning is a worry. Water Heater Repair Portland OR are unable to stress enough the requirement of making certain that all water heater maintenance and installs are conducted by a specialist.

Identify a Gas Water Heater Not Heating

Posted by on May 20, 2015 in Gas Water Heater Repair Portland, Water Heater Repair Portland Oregon | 0 comments

A overwhelming majority of the water heaters Water Heater Repair Portland receives repair requests for are gas water heaters. These are most certainly the most favored type. Listed here are a number of self diagnostic steps one can look at if the gas water heater is just not heating water in any way.

How to Self Diagnose a Portland Gas Water Heater Repair

This will likely appear evident, nonetheless verify to guarantee the gas to the water heater is switched on. Move the gas control knob to PILOT to stop the burner from igniting while looking within. Take off the metal cover at the lower part of the water heater and take a look to check if the burner along with the pilot light are ignited.

If the water heater’s pilot light has gone out, abide by the directions on the storage tank to relight it (we have the common measures to achieve this stated below). There does exist a chance that the gas inlet valve is shut to some extent or entirely. If that is the fact, simply turn the handle parallel to the line and ignite the pilot. If the pilot continue to not ignite, then the concern may perhaps be with the thermocouple. A good number of current water heaters possess a glow plug or spark igniter rather than a pilot. Check out the owner’s info for a reference point.Gas Water Heater Repair Portland

If the burner is not on, replace the cover and make certain the thermostat is establish around 120 degrees F. If it is not, correct it, run on a hot water faucet in close proximity to the water heater, and after that wait around a little bit to check if the water heater burner ignites. If it doesn’t ignite, keep the hot water running and try out decreasing and then increasing the temperature setting on the dial until eventually the burner ignites.

In the event that the burner ignites, replace the cover and switch the thermostat once again to a suitable setting. If the burner will not ignite, allow us to examine the water heater. The heater’s thermostat may very well be malfunctioning. A thermostat switch should really be completed by us.

Do you smell gas? If a smell much like garlic is observed, switch the gas valve control to the OFF placement. Hang on and check if the gas odor is gone prior to relighting the pilot. If it does not pass, without delay switch off the gas supply valve, air out the area as best as is possible and phone the gas utility company.

Pilot Light Doesn’t Stay Lit

Attempt to relight the water heater initially. In general terms, move the water heater’s gas valve to the OFF status then to the PILOT placement. Push the pilot button down to light it, and then hang on until a status light indicates the dial may be changed from PILOT to ON.

If perhaps the pilot light continues going out, possibly the orifices may very well be unclean and blocked, that may make the flame too tiny to remain lit. Verify to be sure there is no evident dirt and debris clogging it.

In cases where everything seems clean, the situation might be with the thermocouple. This is the piece that runs from the temperature control directly into the flame of a pilot light and facilitates the main burner fire up as soon as the water temperature has moved too low. The pilot light could possibly be impacted if the thermocouple is flawed or fails to come into contact with the pilot flame. Various people might feel safe changing a thermocouple, but Gas Water Heater Repair Portland would rather you call us to help.

Decreased gas pressure or a not working gas control valve may also bring about a pilot light to go out often. Call us if you believe this is the situation.

Water Heater Sediment Removal

Posted by on May 12, 2015 in Gas Water Heater Repair Portland, Water Heater Repair Portland Oregon | 0 comments

If you have a trouble with sediment, you’re most likely currently knowledgeable about it. Gas fired water heaters in certain commonly show that there is a sediment issue with rumbling sounds each time the tank cycles, while still keeping excellent water temperature level. Thankfully, sediment can quickly be eliminated, and help prevent the need for a Portland water heater repair.

If you have a gas water heater, turn the control to pilot. If you have an electric design, you ought to shut off the electrical energy at the panel. Next shut down the water above the heater so no brand-new water can get in the tank. Then affix a hose to the drain valve. The various other end of the hose must ideally go to a floor drain, although a pail can likewise be made use of.Hot Water Heater Repair Portland

Open the drain valve to eliminate all the water from the tank. The majority of the sediment needs to be gotten rid of by this easy act. Keep the drain valve open, however switch on the water too, permitting some to get in the tank. Turn off the water after a couple of minutes. Repeat this numerous times to coax as much sediment out with the water.

As a last procedure, close the drain and fill the tank a minimum of half full. Then you can drain it for a last time to get rid of any last remains of sediment. To avoid more usual sediment issues, you can set up a sediment filter for your tank if your trouble is primarily with sand. A sand filter need to be set up on the cold trunk line.

Occasionally sediment can likewise congest the drain valve itself. Preferably you ought to have the ability to wash the valve out under high pressure, however occasionally the valve should be changed after a cleaning. You can achieve this job while the tank is still complete, simply switch off the gas or power and await the water in the tank to cool. You must likewise not make use of any water in your residence will finishing the replacement.

To eliminate the drain valve, merely utilize a huge groove joint pair of pliers to turn off the old valve. Then set up a replacement valve by turning it in clockwise. Make certain to make use of pipe thread sealing tape or pipe joint substance on the threads to make sure that the connection will prove out.

If you are preparing to get rid of the drain valve, you could think about prior to setting up the replacement valve offering your tank a last flush. This is finest done if you have a floor drain that will rapidly drain the water and sediment.

The follow video illustrates this process:

Many individuals incorrectly think that a sediment filled tank or a dripping drain valve is source to change the whole hot water heater. By these basic upkeep actions, the majority of residents need to have the ability to take care of any troubles on their own. Naturally, Water Heater Repair Portland is here to assist with this or any other water maintenance that should be accomplished for you.

Have a look at a few of our additional related water heater repair and maintenance articles:

Emergency Water Heater Shut Off

Water Heater Insulation

Emergency Water Heater Shut Off

Posted by on May 11, 2015 in Water Heater Repair Portland Oregon | 0 comments

No person wishes to think of this, however it is necessary to comprehend the actions associated with closing down ones water heater in case it is required in an emergency Portland water heater scenario.

1. Shut Off the Gas or Electricity

Gas – Turn the dial on the top of the thermostat from the “on” to the “off” location. This will switch off the gas at the water heater. If the scent of gas is ever discovered, get out of the household and make contact with the local gas company instantly.

Electric – Find the breaker box and shut off the breaker for the water heater. One could have a detach switch near to the water heater. Make use of this to shut off the switch to switch off power to the water heater.

2. Switch Off the Water Supply

Locate the cold water pipe hooked up to the water heater and trace it back to the origin or the wall. If it is an old design turn faucet handle, turn it clockwise till it stops. This ought to shut off the water.
If you have a more recent lever design ball valve pull or press the the handle a quarter turn. This ought to shut off the water.

Water Heater Drain.Hot Water Heater Repair Portland

3. Open the Pressure Relief Valve

This is also often referred to as the T&P valve. Opening this will decrease the pressure in the water storage tank. A bit of water can come out of this whenever it is opened up that could be hot so be careful! Lift up the lever so it is sticking straight out or up.

4. Drain the Water Heater

Drain the water heater if needed (this is optional). Stay clear of any problems by hooking up a yard hose to the bottom drain valve of the water heater. Extend the other end of the hose to a lower area where hot or rusty water will not produce damage to lawn and plants. In the household, let flow the hot side faucet in the sink nearest to the water heater. It will discharge the vacuum seal and let the water drain from the water heater much easier. Permit 10-30 minutes for the water heater to empty.

Portland house owners will need to make use of these techniques to switch off the water heater at any time routine maintenance is carried out on the heater also, not only in situations of emergency situations.

Solar Water Heating Options

Posted by on May 5, 2015 in Solar Water Heater Repair Portland, Water Heater Installation Portland | 0 comments

A lot of people see the field of alternative energy and the concept of going environmentally friendly as a novelty, and one that could be not any longer in style. Whereas that could be the truth for a lot of individuals, the necessity for not only us in the United States for being a lot more energy mindful, but as a global society, remains a need. This information is not suggested to be a judgment of the majority of people not becoming energy aware enough, rather a time to check out the solar energy choices for water heating.

Solar water heating is a feasible choice for many of us, and has grown a lot more of an alternative regardless the area of the United States one resides in as technology continues to grow. A great example of this position is to check out Germany. With regards to climate and the quantity of solar energy, Germany resembles Alaska. Nevertheless, Germany is a frontrunner in solar energy research, progress and use. As a country, Germany made the choice to take action, and it is performing effectively for them. Knowing that, the potential for house owners in any area of the U.S. to take advantage of applying solar energy, and not only for water heating, is a choice.Solar Water Heaters Portland

While technologies evolves and much more common in the U.S., the equipment prices for making use of solar water heating will proceed to decrease, which in turn is likely to make it a more inexpensive alternative for the typical house owner. In light of the April, 2015 brand new water heater specifications in the United States, the expense of many new water heaters has grown. Even so, the brand new water heaters manufactured are going to be even more energy efficient, which is certainly a positive.

According to SEIA, more than 9 million U.S. household water heaters are changed on an annual basis. That is good info to making a more environmentally friendly world. The majority of home solar water heating systems are usually set up in a day.

The 2 variations of solar water heating systems are active systems and passive systems. Active systems utilize an electric pump to circulate the water. They’re the most popular in the U.S. for both residential and commercial use. Passive systems make use of thermodynamics to move the water. One can find numerous designs of the 2 main types of systems of which we will not talk about in this article, however the U.S. Department of Energy has outstanding details about them here.

Solar water heaters are made of 3 principal aspects: the solar collector, insulated piping, and a hot water storage tank. Electronic controls may also be included, in addition to a freeze protection system for cold environments. Solar radiation strikes the solar collector, the solar collector absorbs the heat and transfers it to potable water in the system. Flowing out of the collector into a hot water tank, the heated water is accessible and made use of on demand. Either system can provide up to 80 percent of the required hot water need of a residence or building. A common dwelling could decrease its CO2 impact by an average of 28 percent then also.

Sizing a Portland Solar Water Heater System

Residential solar water heater systems are ordinarily sized very similar to that of a conventional water heater, by the volume of hot water normally utilized. A house which would make use of 50 gallons of hot water each day can make full use of a 2 solar panel system. Water heater installment businesses similar to Water Heater Repair Portland have unique methods we make use of to help figure out the solar panel sizing for the volume of hot water necessary a day, per location.

Parts of a Solar Water Heating System

Solar water heating systems are made up of a solar collector, insulated piping, heat transfer fluid, a hot water storage tank, and a system controller. Solar water heating systems operate as follows:

The solar collectors absorb sunlight, causing the fluid inside to heat up.
A controller senses that the collector fluid is hotter than the storage tank and signals a pump to turn on.
The pump circulates heat transfer fluid which carries heat from the collector to the storage tank.
The storage tank holds the heated water which is used as necessary. Auxiliary heating remains connected to the storage tank for back-up heating when needed.

According to the Union of Concerned Scientists, solar water heating systems cost $2,000 – $5,000 to be set up. There are actually various state governments and local utilities incentives offered as well. They have links on their website here with info about incentives. With common maintenance and inspection, a solar water heater system lasts 20 to 30 years with minimum maintenance and costs.

Water Heater Insulation

Posted by on Apr 6, 2015 in Gas Water Heater Repair Portland, Home Winterization, Water Heater Repair Portland Oregon | 0 comments

Most property owners enjoy discovering new tactics to help cut down heating costs in the cold months we realize at Water Heater Repair Portland. And, considering ones water heater works a lot more in the wintertime doing just that, we have gathered some strategies to pass along today on ways to save on energy costs.

Here is a simple method to test ones water heater’s need for insulation: put ones hand near or on the exterior of the water heater’s storage tank. It is feels warm, insulating the tank is suggested. This loss of heat in the winter season will add up. After that, in the summertime, it can add heat to the space that one will want to attempt to cool if the water heater is based within the house and not in a garage. Any heat that is felt is undoubtedly heat getting sacrificed. If it is not warm at all that is a great indication that the tank’s internal insulation is in respectable shape. Brand-new water heating units are being produced with a good quantity of internal insulation today. The R-value is found on the producer’s tag so one can see exactly what the number is. If it R-24 or higher, one will most likely not have to use an insulation blanket on the water heater.

Portland Water Heater Blankets

A water heater blanket or wrap can help get rid of a lot of this heat loss. Initially consult your energy company, for many supply insulation kits at minimized expenses for property owners. These hot water heater blankets be available in various sizes depending upon the gallon size of the storage tank. The greater the R-value, the greater the insulation is. It is recommended utilizing one that is no less than an R-11.

The blankets are uncomplicated to add. They will have insulation tape to complete the joints of the blanket. The shinny or vinyl side should go on the exterior.

With gas water heaters, wrap it around, while not covering the top flue, and unwrapped over the controller at the bottom. Likewise, never cover the T&P valve lever, or the underside of tank for this will prevent air from getting into the tank. With electric water heaters, because there is no exhaust flue on the top, it may be covered, however do not cover the heating-element access panels.

These water heater blankets will certainly last a very long time. It may be used again anytime the water heater is changed, providing it’s the exact same size to match the storage tank.

Water Heater Pipe Insulation

There’s 2 different kinds of pipe insulations that must be utilized for a water heater. All pipes situated inside of six inches from the water heater exhaust flue, fiberglass insulation wrap must be utilized and must be connected with either high temperature aluminum tape or wire. Pipes beyond 6 inches can be covered in foam insulation sleeves.

The United States Department of Energy recommends that property owners insulate a minimum of six feet of the pipe entering and from the water heater. This can improve the temperature level at the faucets 2 to 4 degrees and conserve cash on heating. We likewise recommend wrapping both the cold and hot pipes too.

Energy Savings from Portland Water Heater Insulation

Insulating an ineffective water heater will help lower the expense of operating that heater by 5 % to 10 %. Depending upon the design, that can conserve anywhere from $5 to $20 annually, meaning that a water heater blanket can be paid for in 1 to 4 years. Adding insulation may possibly cut down standby heat losses by 25 % – 45 % and conserve around 4 % – 9 % in water heating expenses.

Portland Plumbing Repair

Posted by on Feb 17, 2015 in Drain Cleaning Portland, Plumbing Repair Portland | 0 comments

Carrying out plumbing upkeep is one method to conserve on your water costs. As a fact, it can assist you prevent significant residence problems which can be rather expensive in the long term. From routine drain cleaning to changing the water heater, there are various methods to be sure that your plumbing system is in great working condition. In case the issue is past your skills, you can always give Water Heater Repair Portland Oregon a call.

Appropriate Plumbing Care and Maintenance

To be able to save water, you need to make sure that the plumbing system is constantly in great working condition. Overruning commodes and leaking pipes can really cost countless dollars. Likewise, you require to inspect for concealed leaks to ensure that you are not squandering cash on the water costs. Attempt to take an appearance at the water meter and observe if there are uncommon modifications that might be an obvious indicator of unidentified leakages.

Portland Plumbing Repairs

Carrying out small repairs is likewise extremely essential in making sure that the plumbing system is operating effectively. In case of troubles, ensure you do not postpone the repair work for this could cost a great deal of cash particularly when the circumstance gets even worse. Even with leaks, definitely be timely. To be able to not squander water, ensure to deal with right away any water damages found. In addition to plumbing repairs you may well likewise desire to safeguard your pipeline throughout cold weather condition. According to professionals, insulated pipes are less likely to come apart. This will in some way avoid from handling expensive leaking repair works.

Various Other Portland Plumbing Maintenance Tips

One method to assist in reducing water damages due to leakages is to inspect pipes throughout the early spring and winter season. If possible, contact us to examine the plumbing system for any possible outflow. Always keep in mind that regular upkeep is one method to save water. Routine safety evaluation does not just assist in conserving water, but it can likewise be a help in decreasing the regular monthly expenses.

If you think plumbing upkeep is a bit complicated, you are completely mistaken. Prior to you even employ somebody who might look after the repair work for you, you ought to understand that easy plumbing jobs can be carried out without expert assistance. Cleaning drains is one of the upkeep jobs property owners can quickly carry out by on their own. So start the practice of staying informed of the condition of your plumbing system at home – it will pay off in the long term!

Avoid a Portland Water Heater Explosion

Posted by on Dec 14, 2013 in Water Heater Repair Portland Oregon | 0 comments

No, it does not happen that typically, fortunately, but a water heater has the potential to explode and cause major damages to a Portland house and individuals. It is easy to have the mindset that it is something that occurs to other people, but without correct care of ones water heater, it can possibly take place to you.

Water Heater Repair Portland Oregon does not want to sound like an alarmist, however wished to share some different videos we assembled from around the Internet to show this point.

The first one is news video from a Phoenix homeowner whose electric water heater exploded quickly after he was performing some maintenance on the heater.

The next example video is from Walnut, CA. it is shared by and the narrator does an outstanding task of discussing how the explosion took place and what sorts of steps a homeowner can take to prevent it.

So what are the methods to prevent this from occurring at home? There are some simple routine upkeep actions property owners can do. However, we cannot stress enough to have an expert take a look at your water heater regularly too, to ensure it is working effectively.

For “fun”, some individuals like to test this concept. The following video holds true with a 50 gallon water heater that reached 330 psi of pressure.

Most likely the most well seen video of examining this concept is from Mythbusters, because they just like to make things exploded. Take pleasure in the last video and bear in mind that water heater safety is not something to be taken for granted or lightly.

Portland Water Heater Repair’s Related Articles

Safety for a Portland Water Heater

Portland Gas Water Heater Troubleshooting Advice

Polybutylene Pipe Debate

Posted by on Dec 6, 2013 in Plumbing Repair Portland, Water Heater Repair Portland Oregon | 0 comments

There are several various kinds of pipes that are used in your house.  Some piping that is used in houses are plastic, copper, galvanized, Polybutylene, cpvc, PVC, polyethylene, etc. Water Heater Repair Portland is going to take a look at one particular pipe and a few of the issues with this pipe following.

Water Heater Repair Portland

Polybutylene Leak #1 (Photo credit: ilovebutter)

That pipe is Polybutylene piping, much better referred to as “POLY” pipe. If you’re asking yourself, “What is Polybutylene?” you possibly fretted that your home or company was constructed with them. If your building was constructed in between the late 1970’s and mid 1990’s, polybutylene pipes may have been and could still be there.

So, you may be asking what’s incorrect with polybutylene pipes? To put it merely, they have an unusually high rate of failure under typical operating conditions. Degeneration connecteded to chlorine water ingredients has been linked to the failures. However, consumers on personal water supplies such as well water have likewise reported numerous troubles.

So what does Polybutylene appearance like?

Polybutylene pipe is gray, black or blue. Inside a home or company polybutylene plumbing is often gray and outside polybutylene plumbing is primarily blue. Polybutylene pipe was set up and made from the late 1970’s till the mid-1990’s, however, stockpiles of polybutylene pipe at supply suppliers, such as supply risers were still known to be readily available up to 1999.

Why is Poly so Bad?

Although some poly piping problems come from incorrect setup, many grievances are with the integrity of the piping itself. Polybutylene pipe is understood to weaken due to speak to with oxidants typically discovered in public water supplies. The failure can happen in the plastic fittings or in the pipe itself. A main issue relating to poly pipe is that, because the oxidants are held in the water, the pipe wears away from the within. Making it really challenging to identify if the pipe is really in excellent condition from just an outdoors evaluation. Many plumbing inspectors can not provide a trustworthy evaluation on the condition of poly piping unless there is a noticeable issue with the exterior of the pipe or its installation. In addition, when a leakage occurs, it might be incredibly extreme because the degeneration occurs from within.

Poly pipe leaks are unforeseeable and there are no signs to alert of an approaching leakage. Some elements that impact polybutylene piping detrimentally can include:

  • Poor setup by service providers.
  • Water quality (nevertheless in many cases this did not matter).
  • Age of the pipe and fittings.
  • Tools used for installation were adjusted for proper tolerances.
  • Chlorine and mineral levels.
  • Wear and tear of fittings (both metal and plastic).

When polybutylene pipe reacts with the oxidants in typical tap water, it becomes fragile, occasionally scaling or flaking. This lead to a fracturing of the interior surface of the pipe, which enables even more wear and tear. Eventually the pipe will start to leak, causing damages throughout a home. Poly pipe with plastic fittings or with metal fittings will eventually incur damage; poly piping is not a reliable piping under any conditions. If a pipe has actually been leaking for a long time without the knowledge of a resident, extreme structural damage to the home can result, making repairs very difficult.

What could happen if Poly is left in the house?

Damage from polybutylene pipe leakages can be costly. Insurance coverage companies in some cases cancel or decline policies for homes with known poly piping problems, and it is hard to market a home that has such an unreliable plumbing system.

The presence of polybutylene pipe can likewise seriously affect a house’s value on the real estate market. Poly pipe normally takes 10-15 years to start to show indications of severe deterioration; for that reason it is essential to know what problems can be caused by its presence, and what can be done about it before it does posture a risk.

What about expense?

Several floor houses will of expense cost more due to the quantity of area that will need to be covered.
Availability of the existing lines.
Capability to reroute the new lines to each component.

Nevertheless, none of these will be as expensive as a pipe, fitting, or valve that has fallen short and leaked triggering damages in the house. We have seen some cases where a ruptured line has caused 30-50 thousand dollars with of damages. If you think you have Poly pipe in the home think about having it examined suggests Water Heater Repair Portland to avoid the expense of a major leak repair.

Enhanced by Zemanta

Portland Thanksgiving Plumbing Care Tips

Posted by on Nov 21, 2013 in Drain Cleaning Portland, Plumbing Repair Portland, Water Heater Repair Portland Oregon | 0 comments

While many people are out shopping the Friday morning after Thanksgiving, Water Heater Repair Portland Oregon is active assisting lots of individuals with clogged drains and toilets.

It is usually garbage disposals that the majority of individuals have the hardest time with throughout the holiday season with all the extra food preparation that gets done so the disposal works overtime. Things to be watchful of NOT grinding up in the disposal are turkey bones, chicken skin, potato peels, celery (anything stringy) and fruit. Also, ensure you have the water running before you turn the disposal on, and afterwards begin chopping stuff up.

Among the most significant thing to look out for that is simple to do considering that it is a liquid, is putting cooking oil and grease down the sink drain. It could be a liquid when it goes down, however in a cold drain line (assuming you could be having cold weather already) it can easily construct up and clog the sink drain. Sort of like it does in our arteries, not to put a bad taste in your mouth thinking of all the terrific food you will be making this holiday … perhaps we must write a short article about healthy holiday foods next!

Also, if you are having guests in, see to it to keep a trashcan in plain sight in the washroom NEXT to the toilet. It will assist with any undesirable items being flushed … ideally … at least with adults.

If you seem to have any slow running drains now, give Water Heater Repair Portland Oregon a call to clean them out good prior to guests arriving and cooking your feast. We would have more time to come before Thanksgiving than after, but you are welcome to save some turkey and stuffing for us for Black Friday.

Check out our Drain Cleaning Portland services pages here.

Drain Cleaning Portland

Safety for a Portland Water Heater

Posted by on Nov 12, 2013 in Electric Water Heater Repair Portland, Gas Water Heater Repair Portland, Water Heater Repair Portland Oregon | 0 comments

Here are some safety tips from Water Heater Repair Portland Oregon to keep in mind with ones water heater to make sure it is running properly and in case of emergencies what to do and not to do.

When water is warmed, calcium carbonate clears up to the bottom of the tank. This sediment minimizes the efficiency of your water heater, as well as its storage ability and eventually its life-span. To fight the effects of this natural process, drain water from your tank 2 to 4 times a year (more typically if you stay in a hard-water location). To do this, first turn the water heater off. Then just attach a length of garden hose to the drain valve near the bottom of the tank and empty numerous gallons into a floor drain or pail. Normally the water will look rusty or brown.

Sometimes sediment sticks inside the valve after you drain it, preventing it from resealing snugly. Opening and closing the valve a few times will normally flush the sediment out of the valve. Finally, remember to turn the water heater back on as the last action of the process.

On most water heater models, there is a safety gadget known as the temperature-pressure relief (“T & P”) valve found near the top. If an excessively high temperature or pressure were to develop up in your water heater, this T & P valve is made to open, relieving the results of the high temperature and/or pressure and so avoiding a surge. As soon as a year, test it– initially, make certain there is a pipe connected to the valve outlet; if not, you or your plumbing professional can add one. Then, pull up on the manage. If water flows out of the pipe then the T & P valve is free to open.Water Heater Repair Portland Oregon

As with the drain valve, sediment could lodge under the valve seat after you test it, avoiding it from re-sealing. If this occurs, pull on the T & P handle a couple of times to purge the sediment away. If it still does not seal, call a certified plumbing technician right away to have the T & P valve changed. NEVER cap the discharge pipe of the T & P valve to prevent leakage.

For energy savings and houses with children, numerous consumer safety organizations advise setting your water heater thermostat to 120 degrees. An unique word of care, nonetheless: water temperatures below 120°F can make it possible for unhealthy germs to grow inside your water heater.

Many property owners insulate their water heaters, especially if found in the garage. Insulation kits made specifically for this purpose are offered. Beware not to cover up the T & P valve, control board, or drain. Do not cover the top of a gas-fired gadget at all; likewise keep the pilot burner access, air intake, and draft diverter cost-free and clear.

A typical 50-gallon capability water heater can hold approximately 400 pounds of water. If you reside in an earthquake area, water heater strap kits are readily available and in some areas even needed, to assist support the system and prevent it from tipping over in case of a tremor.

According to This Old House, “Consider installing an automatic gas-shutoff valve (below) that stops the flow of gas if the ground moves or if gas flow increases dramatically.”

Particular to Gas-Fired Water Heaters:Gas Water Heater Repair Portland

Keep the area around your hot-water tank clean and clear of combustibles. This includes build-ups of dust and dirt, paper of any type, and particularly any flammable liquids. Paint thinner, cleaning agents, and gas are all examples of harmful liquids that need to be stored well away from the water heater. Never trigger aerosol insect bombs nearby without first correctly shutting down the gas supply and extinguishing the pilot light.

If the water heater is located in the garage, raise it so that the pilot burner is 18 inches above the floor. This enhanced height will help prevent the ignition of any gas fumes which gather near the floor.

If you have any gas-fueled appliances (water heater, furnace, oven, clothing dryer, and so on) in your house, a carbon monoxide gas detector is crucial. The Consumer Product Safety Commission alerts carbon monoxide gas poisoning eliminates 200 individuals each year and causes an additional 10,000 to need healthcare facility treatment. This odorless, colorless gas is a prospective danger with all combustion home appliances.

And if you smell gas, leave your house instantly. Use a neighbor’s telephone to call the fire division and the gas company. The tiniest spark can trigger a surge. Gas is lighter than air and will usually diffuse. Propane is heavier than air and will gather in reduced areas, such as basements.

Specialist Maintenance:
Some essential tasks need the know-how of a service specialist (a qualified plumbing professional, heating contractor, or gas company professional).

For gas and oil-fired water heaters, burners must be cleaned when a year. Water Heater Repair Portland Oregon can also inspect flues and vents for fractures or loose connections which might leak deadly exhaust gases.

Possibly the single most overlooked component of your home’s water heater is its sacrificial anode. The anode is a magnesium or aluminum rod which is suspended inside your steel tank. With time, an electrochemical reaction causes the anode rod to corrode while the steel tank continues to be intact. If the anode has sacrificed itself totally and there is no metal left, the electrochemical process attacks the water heater tank itself– it wears away, and you discover yourself in the market for a brand-new water heater!

Instead, have actually a certified plumbing professional (some localities will need plumbing technicians to be certified) replace your anode rod as soon as every two to 5 years.

The life span of a T & P valve is normally three years. Even if a T & P valve looks fine from the outdoors, makers advise they be gotten rid of and visually checked for accumulations of deterioration deposits. Once again, the T & P valve must be replaced only by a certified plumber.

Lastly, a qualified plumbing professional is recommended if your water heater tank is leaking. The typical life-span of both electric and gas water heaters is eight to thirteen years.

If your water heater does overheat and your T & P valve is releasing water or steam, the ONLY safe intervention is to eliminate the heat source by cutting off its fuel, if you can. For an electric heater, journey the circuit breaker; for a gas heater, turned off the gas. NEVER go near the water heater to attempt to relieve the pressure yourself. NEVER include cool water to the tank. And NEVER attempt to cool it by spraying it with a hose. Call Water Heater Repair Portland Oregon and permit the water and water heater to cool naturally.

Here is some more water heater info for you from our blog:

Portland Gas Water Heater Troubleshooting Advice

Running Out of Hot Water?

Advantages of Going Tankless

Enhanced by Zemanta

Portland Home Winterizing Tips

Posted by on Nov 9, 2013 in Home Winterization | 0 comments

There are a great deal of various jobs around the home that homeowners need to bear in mind doing in the be up to winterize their house that Water Heater Repair Portland Oregon would such as to share with you today.

This first post includes the should change ones furnace filters and to examine the batteries on any smoke and carbon monoxide detectors in the home, which we can’t emphasize enough. Also, it is an excellent time to check the pressure relief valve on the water heater. This is a task that needs to be done two times a year. While inspecting this, it likewise makes it a convenient time to drain and flush the water heater tank too.

Winterize your home: How to protect it from 3 big enemies – Denver Post

Fri, 08 Nov 2013 19:49:36 GMT

Winterize your home: How to protect it from 3 big enemiesDenver PostYour house has dust, pet dander and other allergens, and they’re all locked up inside with you during the cold-weather months, promoting colds, sabotaging your furnace’s efficiency a …

This post consists of some various other tips not discussed in the first. When it comes to the water heater once more, if you do not currently have foam insulation on the pipes, it can help reduce heat and energy loss by doing so.

Winterizing your home – Mason City Globe Gazette

Fri, 25 Oct 2013 11:04:45 GMT

Winterizing your homeMason City Globe GazetteMASON CITY | The crisp days of autumn are a signal that it’s time to get the house ready for colder weather ahead. Fortunately there are lots of inexpensive things homeowners can do themselves to seal the …

In this article, we discovered the tip on using a humidifier during the dry winter season months to be handy, particularly if one is making use of a fireplace to assist warm the house. Extremely dry air is not as great for ones wellness and humidifiers are not overly costly to purchase and run.

Jarms Hardware

Sat Nov 09 00:27:17 +0000 2013

A few great tips regarding winterizing your home:



This last short article discusses during down the temperature on ones water heater. If it is not already readied to 120 degrees or lower, doing so during the winter season months can assist save some water heating costs. Likewise, ensure to inspect the water spigots outside the house and to make certain there are not any water leaks too.

01/31/2012 9:36

Try these home winterization tips and hacks to boost your home’s energy efficiency this winter. Winterize your house and save money through energy conservation and weatherization.


Don’t hesitate to contact Water Heater Repair Portland Oregon with any concerns you could have about the routine upkeep one should be doing on any of their house plumbing systems.

Portland Drain Clogs and Pumpkins

Posted by on Oct 31, 2013 in Drain Cleaning Portland | 0 comments

Every year, even more than one billion pounds of pumpkins are produced in America, most of which are sculpted into jack-o’-lanterns during Halloween time. That’s a bunch of leftover pulp. And, a great deal of pulp and seeds that can obstruct drains prior to the end of the Halloween season.

Drain Cleaning Portland

A pumpkin carved into a jack-o’-lantern for Halloween (Photo credit: Wikipedia)

Water Heater Repair Portland Oregon is an usual Halloween visitor to many of the locals needing Drain Cleaning Portland help thanks to sticky pumpkin pulp and seeds. The weeks getting to Halloween, we get great deals of calls from residents struggling with pulp-clogged garbage disposals and clogged kitchen area sink drains.

Pumpkin pulp is not safe for disposals because it is soft, stringy and mushy. It will dry out and harden, choking off drains and garbage disposals, developing a big mess that will need an expert drain cleaning.

On the same note, it is also smart not to attempt flushing the pulp or seeds down the toilet either. Simply toss all of it out in the trash!

When creating pumpkins, do so on newspaper. for it can quickly be covered up and tossed into the garbage can or a compost heap. The seeds can be separated and roasted for a delicious treat or they can be air-dried and planted in the spring after the last frost to expand next year’s Halloween pumpkin.

The horror lurking in your drain at home – Eastbourne Herald

Thu, 31 Oct 2013 07:11:32 GMT

The horror lurking in your drain at homeEastbourne HeraldAs people in Eastbourne get ready to celebrate all things spooky this Halloween, Southern Water is warning of a real horror lurking in people’s homes. Creeping through drains and sewers, the go …

So we like our power tools and just had to share this video from The Home Depot on using them for pumpkin carving:

Enhanced by Zemanta

Fun Facts About Halloween

Posted by on Oct 31, 2013 in Water Heater Repair Portland Oregon | 0 comments

In the spirit of Halloween for today, Water Heater Repair Portland Oregon wanted to pass along the following infographic that we took pleasure in on Halloween data. Not too many of the results were surprising to us, however we enjoyed the finding that the typical pumpkin has about 500 seeds. Enjoy the day!

Halloween Facts 2013: 6 Fun Details About The Spooky Holiday – Latin Times

Wed, 30 Oct 2013 15:52:38 GMT

Newsday Halloween Facts 2013: 6 Fun Details About The Spooky Holiday Latin Times And the Halloween industry is getting bigger by the day, as the National Retail Federation has found that the money spent on Halloween has risen by 54 percent since 2005 an …


Halloween By The Numbers

by Column Five Media.
Explore more infographics like this one on the web’s largest information design community – Visually.


Enhanced by Zemanta

Portland Gas Water Heater Troubleshooting Advice

Posted by on Oct 31, 2013 in Gas Water Heater Repair Portland, Water Heater Repair Portland Oregon | 0 comments

So the gas water heater at home is not working as well as it should? It is usually one of simply a few things that will go wrong with the device. Check out with these concepts below to see if you are able to examine what the cause may be. We can be reached anytime to help with this Gas Water Heater Repair Portland as well!

Pilot Lights

Gas hot water heater troubleshooting always appears to begin with the pilot light. The majority of gas hot water heaters us a pilot light to spark the burner. There are some more pricey models that use electronic ignition. When the pilot light is out or won’t remain on, you will not have hot water.


The thermocouple is a sensor that informs the gas valve when to allow gas to stream to the burner. Gas hot water heater troubleshooting frequently involves the thermocouple. When they go bad the will not permit the gas valve to release any gas. No gas, no hot water.


The thermostat is part of the gas valve. There is not a lot that can be done to deal with one that is bad, short of changing the gas valve. The primary interested in the thermostat is getting the temperature level correct. Water that is too hot can be dangerous. Learn exactly what the appropriate settings are.

Gas Valves

The gas valve controls the gas that goes both to the pilot light and the main burner. It makes use of the thermocouple to determine when it is safe to release the gas. It likewise makes use of an essential thermostat to know when more heat is required. Surges can arise from gas that is not burned. Therefore the water heater gas valve has actually safety gadgets built in.


Blockages in the vent pipe can limit the air flow to your water heater. This will trigger the burner to run badly. It might imply a decreased quantity of hot water. Terribly obstructed vents will lead to dangerous gases constructing up in the home.

Here is a nice video on routine maintenance tasks for a gas water heater:

Sink Drain Care to Prevent Drain Cleaning

Posted by on Oct 26, 2013 in Drain Cleaning Portland | 0 comments

The bеѕt way tо prevent уоur Portland OR drаin frоm gеtting сlоggеd iѕ to simply bе aware of what you are рutting intо thеm. Drain Cleaning Portland hаs fоund thаt there are fоur mаjоr еnеmiеѕ of уоur drаinѕ, and thоѕе аrе soap scum, hаir, соffее grоundѕ, and cooking grease. If уоu саn hеlр it, try to аvоid рutting any оf thеѕе things intо your drain, and уоu will be оn your firѕt ѕtер tо avoiding a сlоggеd drаin. Hеrе are some tips to help you kеер your drаinѕ running smoothly:

Drain Cleaning Portland

kitchen drain, with in-sink-erator (Photo credit: Wikipedia)

  • Whеn you аrе dоing your diѕhеѕ, uѕе thе drain-grate! Thiѕ can trap аll ѕоrtѕ оf ѕоlid objects that shouldn’t bе going down your drаin, whiсh уоu саn thеn throw in thе garbage оr рut in thе disposer to bе ѕаfеlу grоund uр and fluѕhеd away.
  • Dоn’t poor hоt grease dоwn thе drаin! Save it in a container (оld рiсklе jаrѕ wоrk grеаt) until it сооlѕ, thеn thrоw it аwау in the trash. Grease саn сlоg up уоur drаinѕ likе fаt in аn аrtеrу; сlоggеd рiреѕ will rеԛuirе drаin сlеаning, whiсh iѕn’t frее!
  • Dоn’t put уоur соffее grounds dоwn thе drаin! Thrоw thеm in the gаrbаgе, оr uѕе them аѕ fеrtilizеr оr mulсh fоr уоur gаrdеn.

As a рrеvеntаtivе mеаѕurе, gеt in thе hаbit оf running hot water dоwn thе ѕink аftеr уоu аrе dоnе uѕing it; hоt water hеlрѕ kеер fооd dеbriѕ frоm ѕtiсking tо thе inѕidеѕ оf уоur pipes, and аlѕо kеерѕ fооd оilѕ flowing. Flоwing iѕ gооd; blосkеd up iѕ bаd.
If уоu find уоurѕеlf running into a lоt оf clogging, or if the wаtеr isn’t going dоwn the drain ԛuiсklу, givе Drain Cleaning Portland a call аnd wе’ll come fix it. Our drаin сlеаning mеthоdѕ aren’t about putting a bandaid over thе рrоblеm tо rеturn аgаin whеn it gеtѕ rе-сlоggеd; we will isolate the рrоblеm with уоur drains, сlеаr and сlеаn it the right way, and mаkе ѕurе уоu won’t have repeat сlоgѕ.

Enhanced by Zemanta

Portland Water Heater Replacement Considerations

Posted by on Oct 26, 2013 in Water Heater Installation Portland, Water Heater Replacement Portland | 0 comments

When сhооѕing a water hеаtеr replace in Portland, choose a ѕуѕtеm thаt will nоt оnlу рrоvidе уоu with ѕuffiсiеnt hоt wаtеr but will аlѕо do so in an еffiсiеnt wау, ѕаving уоu money аnd time in thе lоng run. Thеrеfоrе, уоu ѕhоuld take уоur timе tо соnѕidеr diffеrеnt tуреѕ оf water heaters аvаilаblе аnd choose оnе with appropriate size dереnding upon the fuel source fоr уоur home.

A Clоѕеr Lооk аt Different Tуреѕ Water Heater Replacement Portland Choices

Cоnvеntiоnаl tank type storage water hеаtеrѕ.

Water Heater Replacement Portland

English: Flat-plate solar thermal collector, viewed from roof-level (Photo credit: Wikipedia)

Tаnklеѕѕ wаtеr heaters thаt ѕuррlу hоt wаtеr dirесtlу withоut uѕing any storage tank.
Hеаt рumр water hеаtеrѕ thаt mоvе hеаt frоm one рlасе tо аnоthеr. Thеу dо not gеnеrаtе heat dirесtlу for рrоviding thе hоt wаtеr.
Sоlаr wаtеr heaters thаt uѕе thе sun’s heat fоr рrоviding thе hоt wаtеr.

Selection criteria: When selecting a water hеаtеr for your house, соnѕidеr thе fоllоwing:

Fuеl tуре, itѕ availability and соѕt, thе еnеrgу ѕоurсе уоu will uѕе fоr hеаting water will not only аffесt itѕ еnеrgу еffiсiеnсу аnd size, but also its аnnuаl ореrаting соѕt.
Enеrgу еffiсiеnсу, in оrdеr tо mаximizе cost аnd еnеrgу ѕаvingѕ, уоu should сhесk hоw еnеrgу efficient thе hot wаtеr heater is bеfоrе уоu buy it. Yоu саn rеѕеаrсh online fоr уоur options аnd сhооѕе thе bеѕt оnе ассоrding tо уоur needs.
Size, tо рrоvidе sufficient hоt wаtеr аnd tо inсrеаѕе еffiсiеnсу, уоu ѕhоuld buу a properly ѕizеd hоt wаtеr heater.
Cоѕtѕ, bеfоrе you buу a hot wаtеr hеаtеr, you ѕhоuld also еѕtimаtе itѕ аnnuаl operating соѕt аnd аlѕо соmраrе it with оthеr mоrе/ lеѕѕ energy-efficient mоdеlѕ.

Yоu ѕhоuld also rеѕеаrсh оn аll орtiоnѕ to rеduсе уоur hоt wаtеr usage. Yоu ѕhоuld еxрlоrе strategies ѕuсh аѕ drаin-wаtеr hеаt rесоvеrу, аѕ it саn save gооd mоnеу оn your annual water hеаting billѕ.

Whеn selecting уоur hоt wаtеr hеаtеr, it iѕ imроrtаnt tо соnѕidеr thе еnеrgу source you will use, inсluding itѕ rеаdу аvаilаbilitу and cost. Thе соѕt оf fuel used bу the water hеаtеr will not only аffесt itѕ еnеrgу еffiсiеnсу аnd size, but also itѕ annual operating соѕt.

According to the Green Building Advisor, “When it comes to choosing a water heater, though, clarity evaporates. Simple, affordable water heaters aren’t very efficient, and efficient equipment is complicated and costly….” (read more)

Don’t hesitate to contact us for Water Heater Installation Portland questions you may have!

Enhanced by Zemanta

Advantages of a Gas Water Heater in Portland

Posted by on Oct 26, 2013 in Gas Water Heater Repair Portland | 0 comments

Hot water heaters аrе аn important asset tо аnу hоmе. Thе ԛuаlitу аnd tуре оf wаtеr hеаtеr саn grеаtlу impact a homeowner’s budgеt. Natural gаѕ wаtеr heaters рrоvidе bеnеfitѕ thаt rаngе frоm еnvirоnmеntаl concerns tо lоwеring utilitу billѕ.Gas Water Heater Repair Portland

Thе initiаl inѕtаllаtiоn оf a Gas Water Heater in Portland саn bе еxреnѕivе but mаnу еnеrgу соmраniеѕ оffеr rеbаtеѕ thаt can оffѕеt thiѕ cost. Some rеbаtеѕ саn be fоund at lосаl utilitу соmраniеѕ оr ѕоmе mау bе available оnlinе. Cеrtаin wаtеr heaters that uѕе natural gas аrе tаnklеѕѕ whiсh eliminates thе demand tо heat a ѕtоrеd аmоunt оf wаtеr аnd instead heats juѕt thе water thаt is nееdеd. Thiѕ hеlрѕ kеер thе соѕt of hеаting lower and prevents thе problem of running оut of hot wаtеr. Even gas wаtеr heaters that uѕе tanks tеnd tо be easier on thе utilitу bill since natural gаѕ iѕ usually сhеареr thаn еlесtriсitу.

Nаturаl gаѕ water hеаtеrѕ also рrоvidе оthеr рrасtiсаl perks. A tаnklеѕѕ water hеаtеr option саn save ѕрасе аnd ѕinсе wаtеr iѕ bеing hеаtеd аѕ nееdеd, саn help keep the water сlеаnеr. Nаturаl gаѕ setups that inсludе tаnkѕ also have a faster rесоvеrу timе than conventional еlесtriс wаtеr hеаtеrѕ. In times where power iѕ cutoff tо a home a natural gаѕ wаtеr heater can ѕtill рrоvidе hоt wаtеr uninterrupted.

For the есо соnѕсiоuѕ, uѕing natural gаѕ for a wаtеr hеаtеr provides more еffiсiеnсу аnd a cleaner burn thаn еlесtriс water heaters. Thеу rеlеаѕе ѕignifiсаntlу lеѕѕ hаrmful еmiѕѕiоnѕ ѕuсh as саrbоn diоxidе аnd sulfur diоxidе, and hеlр lоwеr a hоmеоwnеr’ѕ саrbоn fооtрrint.

In mаnу ways wаtеr hеаtеrѕ using natural gаѕ аrе рrеfеrаblе to оldеr electric driven wаtеr heaters. They аrе cost effective, сlеаnеr, and more еffiсiеnt. Any homeowner thinking of rерlасing thеir еxiѕting water heater ѕhоuld rеѕеаrсh аnd consider thеir options саrеfullу. Finding thе right fit for the hоmе can mean a hugе diffеrеnсе in a fаmilу’ѕ budget.

If you currently have a natural gas heater, Gas Water Heater Repair Portland can help with any maintenance issues you might be having.

Enhanced by Zemanta

Advantages of Going Tankless

Posted by on Oct 26, 2013 in Tankless Water Heater Repair Portland, Water Heater Repair Portland Oregon | 0 comments

Many реорlе are dесiding tо go tаnklеѕѕ with thеir wаtеr hеаtеr. Nоw thе question is, whу? Wеll, thеrе аrе mаnу bеnеfitѕ suggests Water Heater Repair Portland Oregon. First аnd fоrеmоѕt, the energy соѕt iѕ rеduсеd. Tурiсаl tаnk-tуре wаtеr heaters lоѕе thеrmаl hеаt when thе ѕtоrаgе tаnk loses rаdiаnt hеаt. With a tankless water heater,

Water Heater Repair Portland Oregon

thеrmаl hеаt is never lоѕt. Being that thеrе iѕ nо storage tаnk, hоt water iѕ givеn оff оnlу whеn nееdеd. Thаt can сut your соѕt оf energy uр tо 50%. Nоw with that in mind, tаnklеѕѕ hеаtеrѕ аlѕо nеvеr run оut оf hot water. It iѕ heated inѕtаntlу. That iѕ a grеаt benefit ѕinсе wаtеr hеаtеrѕ with storage tаnkѕ run оut оf hоt water whеn thе ѕuррlу iѕ аll used uр. Thаt means after a соuрlе hot ѕhоwеrѕ, tankless wаtеr hеаtеrѕ саn ѕtill рrоduсе hоt wаtеr аnd you will not nееd to wаit fоr the wаtеr to get hоt.

According to Energy Star, “By heating water only when you need it, ENERGY STAR certified tankless water heaters save the typical family more than $80 per year, or $1,700 over the lifetime of the water heater, on gas bills compared to a standard storage model. Larger families can save even more!”

Another grеаt bеnеfit is that tankless wаtеr heaters hаrd wаtеr minerals аrе hаndlеd much bеttеr thеn they wоuld be in a storage tаnk. Because nо wаtеr is actually ѕtоrеd likе thеу аrе in a storage tаnk, gоing tаnklеѕѕ is еаѕiеr tо mаintаin and уоu аrе lеѕѕ likely tо hаvе a leak оr a ruрturе. Alоng with thаt iѕ a lоngеr lifеѕраn оf the water heater. Tankless wаtеr hеаtеrѕ can lаѕt more thаn 20 уеаrѕ whilе ѕtоrаgе tаnk water hеаtеrѕ саn lаѕt between 6-12! And nоthing iѕ more unappealing when соnсеаling a trаditiоnаl wаtеr heater with thе ѕizе and bulkinеѕѕ. With a tаnklеѕѕ hеаtеr, thе size iѕ of a suitcase! Thаt givеѕ уоu more ѕрасе in thе location уоu hаvе your water hеаtеr inѕtаllеd.

Sаfеtу wiѕе, thе tеmреrаturе саn bе ѕеt to a more rеаѕоnаblе temperature that iѕ сlоѕеr tо thе асtuаl hottest temperature уоu believe уоu will nееd. Thiѕ саn rеduсе ѕсаlding tеmреrаturеѕ that уоu саn receive frоm ѕtоrаgе tank hеаtеrѕ whiсh have the lоwеѕt temperature around 130 dеgrееѕ. So сhildrеn аnd аdultѕ a likе dоn’t hаvе to bе as саutiоuѕ whеn it соmеѕ to burning thеir hands in hоt wаtеr.

Not to necessarily endorse one brand, but this manufacturer video does a nice job of explaining the leading benefits:

If you already have a tankless heater and need any maintenance, check out our Tankless Water Heater Repair Portland page here for some information.


Enhanced by Zemanta

Running Out of Hot Water?

Posted by on Oct 26, 2013 in Water Heater Repair Portland Oregon | 0 comments

Your Water Heater Might Need a Repair If SoWater Heater Repair Portland Oregon

Hot water iѕ one оf thе modern luxuriеѕ thаt wоuld be vеrу hard tо livе withоut we know at Water Heater Repair Portland Oregon. Mоѕt реорlе nеvеr stop tо соnѕidеr the аmоunt оf wеаr and tear thаt a hоmе wаtеr heater еndurеѕ every day to рrоvidе a соntinuоuѕ ѕuррlу of hot water. Eасh day a family rеliеѕ оn important life ѕuрроrt асtivitiеѕ likе ѕhоwеrѕ, wаѕhing laundry, сlеаning diѕhеѕ аnd оthеr tуреѕ оf household сlеаning. With thiѕ аmоunt of dаilу wеаr and tеаr, it iѕ nоt surprising that a water hеаtеr needs frеԛuеnt maintenance and repair. It iѕ important for hоmеоwnеrѕ tо саll a liсеnѕеd plumber to реrfоrm rеgulаr mаintеnаnсе аnd rераirѕ оn thеir wаtеr hеаtеr. Hоwеvеr, thеrе are a fеw соmmоn signs a homeowner саn lооk fоr thаt роint to a роѕѕiblе nееd fоr water hеаtеr rераir.

Onе tурiсаl соnсеrn thаt homeowners frequently rероrt iѕ аn inadequate amount оf hоt wаtеr. There аrе ѕеvеrаl rеаѕоnѕ why thеrе mау nоt be enough hоt water. Othеr thаn thе hеаtеr bеing too small tо ассоmmоdаtе thе fаmilу’ѕ nееdѕ, thе dip tubе could hаvе lооѕеnеd. Thiѕ will саuѕе аll оf thе cold wаtеr thаt соmеѕ intо thе wаtеr hеаtеr to ассumulаtе at thе top of the tаnk. Anоthеr cause соuld bе thаt the thеrmоѕtаt оn thе wаtеr heater iѕ brоkеn.

It is аlѕо соmmоn for wаtеr heaters tо dеvеlор leaks. Anу аррliаnсе thаt рrосеѕѕеѕ a lоt of wаtеr саn еvеntuаllу bеgin tо lеаk. A water hеаtеr can ѕtаrt tо leak because оf fаultу gаѕkеtѕ, wоrn оut vаlvеѕ оr frоm too muсh рrеѕѕurе building uр inѕidе оf thе tank. If water spots are viѕiblе аrоund thе hеаtеr, it iѕ аdviѕаblе tо nоtifу a рlumbеr immеdiаtеlу.

Another common соmрlаint iѕ nоiѕе. The resident will ѕtаrt tо hear strange rumbling or rаttling nоiѕеѕ соming from the water heater. Thiѕ mоѕt likеlу indicates thаt minerals hаvе соllесtеd оn the bоttоm of thе tаnk. Thе rеѕulting layer оf sediment frоm minеrаlѕ mаkеѕ air bubblеѕ fоrm when it is heated. The аir bubbles produce thе rumbling nоiѕе that iѕ heard.

It is imроrtаnt fоr hоmеоwnеrѕ tо wаtсh fоr thеѕе tell-tale ѕignѕ that thе water hеаtеr mау nееd rераir, especially if thе wаtеr heater hаѕn’t been ѕеrviсеd fоr a long timе.  IF you are having issues, check out our tips here.

Enhanced by Zemanta